CubeSat S-Band Transceivers

The minimum order quantity for this subsystem is 20 pieces.

SRS-3 is a low-power, full-duplex S-band transceiver for TM/TC on micro- and nano-satellites. It operates on ITU space operations frequencies with integrated filters, LNA, and power amplifier, requiring only passive external antennas. It is highly configurable in orbit, with adjustable frequencies, bit rates, output power, and framing.

SRS-4 is a full-duplex S-band transceiver designed for high-speed data transfer on micro- and nano-satellites. It operates on ITU space operations S-band frequencies using BPSK, QPSK, and 8PSK modulation with CCSDS-recommended channel coding, enabling integration with both independent and commercial ground station networks.

These full-duplex S-band Transceivers are designed by NanoAvionics’ partner Satlab for TM & TC and high-speed data transfer on micro- and nano-satellites.

The minimum order quantity for this subsystem is 20 pieces.

SRS-3 is a low-power, full-duplex S-band transceiver for TM/TC on micro- and nano-satellites. It operates on ITU space operations frequencies with integrated filters, LNA, and power amplifier, requiring only passive external antennas. It is highly configurable in orbit, with adjustable frequencies, bit rates, output power, and framing.

SRS-4 is a full-duplex S-band transceiver designed for high-speed data transfer on micro- and nano-satellites. It operates on ITU space operations S-band frequencies using BPSK, QPSK, and 8PSK modulation with CCSDS-recommended channel coding, enabling integration with both independent and commercial ground station networks.

These full-duplex S-band Transceivers are designed by NanoAvionics’ partner Satlab for TM & TC and high-speed data transfer on micro- and nano-satellites.

SRS-3 Features and Parameters:
Features:
- Variable transmit symbol rate up to 512 kbps
- Variable receive symbol rate up to 128 kbps
- Configurable forward error correction and framing
- Adjustable output power up to 30 dBm with Automatic Level Control (ALC)
- On-board PA, LNA, transmit and receive filters
- CAN-bus and RS-422 interfaces using CubeSat Space Protocol (CSP)
- Ethernet interface with IP routing
- AES-256-GCM link-layer encryption and authentication
- PC/104 form factor aluminum enclosure
Parameters:
- Transmit frequency: 2200 to 2290 MHz
- Transmit power: Adjustable 20 dBm to 30 dBm, with ALC
- Receive frequency: 2025 to 2110 MHz
- Receive sensitivity: -107 dBm (<1% PER, 128 kBd, BT=0.5)
- Input voltage: 5 – 40 V
- Operating temperature:
  - Rx: -40℃ to +85℃
  - Tx: -40℃ to +70℃
- Dimensions: 87.0 x 93.0 x 17.0 mm
- Mass: 190 g
SRS-4 Features and Parameters:
Features:
- Variable transmit symbol rate up to 5 MBd
- BPSK, QPSK and 8PSK transmit modulation
- BPSK and QPSK receive modulation up to 5 MBd
- Run-time configurable convolutional and/or Reed-Solomon forward error correction
- Adjustable output power up to 33 dBm with power monitoring and regulation
- CAN-bus and RS-422 interfaces using CubeSat Space Protocol (CSP)
- Ethernet interface using IP
- AES-256-GCM link-layer encryption and authentication
- PC/104 form factor aluminum enclosure
- Fully on-orbit software upgradable
Parameters:
- Transmit frequency: 2200 to 2290 MHz
- Transmit power: 20 dBm to 33 dBm
- Receive frequency: 2025 to 2110 MHz
- Receive sensitivity: -122 dBm (<1% PER, 100 kBd BPSK)
- Input voltage: 5.1 – 28.8 V
- Operating temperature:
  - Rx: -40℃ to +85℃
  - Tx: -40℃ to +70℃
- Dimensions: 93.0 x 87.2 x 18.0 mm
- Mass: 253 g