CubeSat S-Band Transceiver | NanoAvionics
CubeSat S-Band Transceiver

CubeSat S-Band Transceiver

The minimum order quantity for this subsystem is 20 pieces.

This full-duplex low-power S-band Transceiver is designed by NanoAvionics’ partner Satlab for TM & TC on micro- and nano-satellites.

The transceiver operates on the ITU space operations S-band frequencies with GMSK modulation and CCSDS recommended channel coding, enabling integration with both individual and commercial ground station networks.

The unit has separate filtered RF connections for input and output, allowing for different receiving and transmitting antennas.

The minimum order quantity for this subsystem is 20 pieces.

This full-duplex low-power S-band Transceiver is designed by NanoAvionics’ partner Satlab for TM & TC on micro- and nano-satellites.

The transceiver operates on the ITU space operations S-band frequencies with GMSK modulation and CCSDS recommended channel coding, enabling integration with both individual and commercial ground station networks.

The unit has separate filtered RF connections for input and output, allowing for different receiving and transmitting antennas.

  • Features:
    • Variable transmit bit rate from 100 kbps to 500 kbps
    • GMSK modulation (BT=0.35)
    • Configurable Reed-Solomon and convolutional coding forward error correction
    • Adjustable output power up to 30 dBm
    • Output power monitoring and regulation
    • CAN-bus, RS-422 and Ethernet interfaces using CubeSat Space Protocol (CSP)
    • Wide input voltage range with protection
    • Integrated temperature and power monitoring
    • CubeSat Kit form factor compatible aluminum enclosure
    • Delivered with support library for easy integration
  • Performance:
    • Transmit frequency: 2200 to 2290 MHz
    • Transmit bit rate: 100 to 500 kbps
    • Transmit power: Adjustable 20 to 30 dBm
    • Receive frequency: 2025 to 2110 MHz
    • Receive bit rate: 100 kbps
    • Receive sensitivity: -110 dBm
    • Input voltage: 5 – 40 V
    • Typical power consumption (5 V input, 25℃):
      Rx: 0.65 W
      Rx+Tx: 6.5 W (30 dBm Pout)
    • Operating temperature:
      Rx: -40℃ to +85℃
      Tx: -40℃ to +70℃
    • CAN-bus: Up to 1 Mbit/s
    • RS-422: Full-duplex, up to 3 Mbit/s
    • Ethernet: Full duplex, 100 Mbit/s
    • Dimensions: 93.0 x 87.2 x 17.0 mm
    • Mass: 191 g
  • Configuration Options:

    Conformal Coating (optional)
    Conversion Coating Alodine 1200S (optional)

  • Flight Heritage:

    M6P – 2019;

    BW1 – 2019;

    R2 – 2019;

    LS3 – 2020.